Robotic-Assisted Hip and Knee Arthroplasty: A Bibliometric Analysis Using the Scopus Database.

Robotic-assisted hip and knee arthroplasty represents cutting-edge advancements in orthopedic surgery, harnessing robotic technology to enhance precision, improve clinical outcomes, and facilitate intra-operative procedures. In these robotic-assisted surgeries, the robotic systems assist surgeons in planning and executing joint replacement surgeries, thereby facilitating personalized implant positioning and optimizing the fit and alignment of hip and knee implants. Despite the increasing attention garnered by robotic-assisted hip and knee arthroplasty in recent years, a comprehensive bibliometric analysis using the Scopus database has yet to be conducted. This bibliometric analysis reviews the Scopus database from 1961 until 2022 to investigate the literature on the field of robotic-assisted hip and knee arthroplasty. A total of 577 articles that satisfied the selection criteria were included in this review. The majority of the articles focus more on total knee replacement, compared to total hip replacement and unicompartmental knee arthroplasty. The overwhelming majority of the articles were authored by researchers and clinicians from the United States of America (USA) and the United Kingdom (UK). Similarly, most of the articles with the highest number of citations were authored by researchers and clinicians from these regions. This comprehensive bibliometric analysis using Scopus in the domain of robotic-assisted hip and knee replacement has the potential to act as a roadmap for researchers, clinicians, and policymakers, facilitating informed decision-making, promoting collaborative initiatives, and guiding the development of future studies to further advance the field of robotic-assisted hip and knee arthroplasty.

COVID-19 Infodemiology: Association Between Google Search and Vaccination in Malaysian Population.

Background In light of the ongoing coronavirus disease 2019 (COVID-19) pandemic, vaccination is one of the most important defensive strategies in combating the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Vaccine hesitancy or anti-vaccination attitude has become a barrier to the nationwide vaccination program, potentially sabotaging the effectiveness of vaccination. Thus far, Google Trends (GT) has been used extensively for monitoring information-seeking behavior during the pandemic. We aimed to investigate the association between Google search, the vaccination rate, and the number of vaccinated and infected cases among the Malaysian population. Material and method GT's customizable geographic and temporal filters were applied to include results for predetermined keywords from January 1, 2021, to December 31, 2021. Both Malay and English languages were used to reflect the multi-racial and multi-lingual community in Malaysia. The search volume index (SVI) derived was compared with the numbers of vaccinated and infected cases which were extracted from the open-access database (COVIDNOW in Malaysia) within the same period. Both analyses were performed independently by two authors to ensure accuracy of the data extraction process. A descriptive analysis was used to compare GT analyses and the number of daily vaccinations and positive COVID-19 cases. Results The information-seeking behavior in the public fluctuated from time to time. The interest surged during the initiation of vaccination program and upon the outbreak of COVID-19 in Malaysia. The surge in interest prior to the peak of vaccination rate also indicated that the public tended to get information online prior to getting the vaccines.  Conclusion This observational study illustrates the ability of GT to monitor the interest of vaccination among the Malaysian population during the pandemic. By monitoring the dynamic changes in Google Trends, healthcare authorities can get a glimpse of public perceptions such as attitude towards COVID-19 vaccine, hence potentially identify and stymie any dangerous online anti-vaccination rhetoric swiftly.

Malaysian Public Interest in Common Medical Problems: A 10-Year Google Trends Analysis.

Background An analysis of internet search has been performed to evaluate the public interest in health problems. Google Trends (GT) serves as a free platform to analyse the search traffic for specific terms in the Google search engine. This observational study aims to investigate the trend of Malaysian population in using the Google search engine on common medical problems and explore the geographical influence on the language used. Material and method Fifteen pairs of keywords, in Malay and English language, were chosen after going through forward and backward translation and vetting by a panel of experts. GT data for the selected keywords from 1st of January 2011 to 31st of December 2020 was extracted. Trend analysis was performed using paired t-test between the first half of the decade and the second half of the decade. The different languages used were analysed based on geographical variation using paired t-test. Results The public interest on those keywords was markedly increased in the second half of the decade with 29 out of 30 keywords showing statistically significant difference. Majority of the states preferred to use Malay keywords, especially those residing at the East Coast of Peninsular Malaysia. Conclusion This observational study illustrates the ability of GT to track healthcare interest among Malaysian population. GT provides a good platform to analyse specific healthcare interest in Malaysian population, but investigators have to bear in mind the geographical influence on the language used.

Near-Complete Genome Sequences of Nine SARS-CoV-2 Strains Harboring the D614G Mutation in Malaysia.

Here, we report the nearly complete genome sequences of nine severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants with the D614G mutation. These viruses were detected from various infected individuals with different levels of severity from Pahang, Malaysia. In addition, this study described the presence of lineage B.1.351 as a type of variant of concern (VOC) and lineages B.1.466.2 and B.1.524 as local variants.

Effects of low-intensity pulsed ultrasound on recovery of physical impairments, functional performance and quality of life after total knee arthroplasty: Protocol for a quasi-experimental study.

INTRODUCTION: The presence of significant pain and swelling during the acute stage following total knee arthroplasty (TKA) may limit the patients' ability to cooperate in intensive physiotherapy interventions. Low-intensity pulsed ultrasound is one of the modalities that can be used for acute pain and swelling management. However, only one study investigated the effect of this modality in patients with TKA. There is limited documentation of the effects of combining low-intensity pulsed ultrasound in TKA rehabilitation in the recovery of physical impairments and how these influence the recovery of function after TKA. Therefore, this study is proposed with the aim to evaluate the effects of low-intensity pulsed ultrasound as an adjunct to conventional physiotherapy on the recovery of physical impairments, functional performance and quality of life after TKA surgery. METHODS: This is an assessor-blinded quasi-experimental study comparing two approaches of physiotherapy, namely pulsed ultrasound-added physiotherapy and conventional physiotherapy. Total number of participants with TKA required for this study will be calculated based on the result of a pilot study. Participants will be alternately allocated into either pulsed ultrasound-added physiotherapy group (low-intensity pulsed ultrasound and conventional physiotherapy) or control group (conventional physiotherapy). Pulsed ultrasound-added physiotherapy group will receive low-intensity pulsed ultrasound starting at post-operative day 2 (4-5 times for the first-week after surgery and 2-3 times a week for a further 2 weeks). Both groups will receive conventional physiotherapy 4 to 5 times for the first-week after surgery and 2 to 3 times a week for a further 11 weeks. This procedure and process will be tested and established in a pilot study. Primary outcomes of interest are pain level, swelling, active range of knee motion, and quadriceps strength. The secondary outcomes are functional performance and quality of life. DISCUSSION: This study will fill the gaps in knowledge relating the benefits of including low-intensity pulsed ultrasound into conventional physiotherapy for patients with TKA. TRIAL REGISTRATION: Australian New Zealand Clinical Trials Registry, ACTRN12618001226291.

Matrix Production in Chondrocytes Transfected with Sex Determining Region Y-Box 9 and Telomerase Reverse Transcriptase Genes: An In Vitro Evaluation from Monolayer Culture to Three-Dimensional Culture.

Background: This study aimed to observe the cartilaginous matrix production in SRY (sex determining region Y)-box 9 (SOX9)- and/or telomerase reverse transcriptase (TERT)-transfected chondrocytes from monolayer to three-dimensional (3D) culture. Methods: The genes were transferred into chondrocytes at passage-1 (P1) via lipofection. The post-transfected chondrocytes (SOX9-, TERT- and SOX9/TERT) were analysed at P1, P2 and P3. The non-transfected group was used as control. The 3D culture was established using the chondrocytes seeded in a disc-shaped PLGA/fibrin and PLGA scaffolds. The resulting 3D "cells-scaffolds" constructs were analysed at week-1, -2 and -3. The histoarchitecture was evaluated using haematoxylin and eosin, alcian blue and safranin o stains. The quantitative sulphated glycosaminoglycan (sGAG) content was measured using biochemical assay. The cartilage-specific markers expression were analysed via real-time polymerase chain reaction. Results: All monolayer cultured chondrocytes showed flattened, fibroblast-like appearance throughout passages. Proteoglycan and sGAG were not detected at the pericellular matrix region of the chondrocytes. The sGAG content assay indicated the matrix production depletion in the culture. The cartilage-specific markers, COL2A1 and ACAN, were downregulated. However, the dedifferentiation marker, COL1A1 was upregulated. In 3D "cells-scaffolds" constructs, regardless of transfection groups, chondrocytes seeded in PLGA/fibrin showed a more uniform distribution and produced denser matrix than the PLGA group especially at week-3. Both sGAG and proteoglycan were clearly visualised in the constructs, supported by the increment of sGAG content, quantitatively. Both COL2A1 and ACAN were upregulated in SOX9/TERT-PLGA and SOX9/TERT-PLGA/fibrin respectively. While, COL1A1 was downregulated in SOX9/TERT-PLGA. Conclusion: These findings indicated that the SOX9/TERT-transfected chondrocytes incorporation into 3D scaffolds facilitates the cartilage regeneration which is viable structurally and functionally.

Predictors of major lower limb amputation among type II diabetic patients admitted for diabetic foot problems.

INTRODUCTION: Diabetes mellitus (DM) is the most common cause of amputations in Malaysia. This study aimed to identify the predictive factors for major lower limb amputation among patients with type 2 DM (T2DM) who were admitted to a hospital, in order to reduce its likelihood. METHODS: This cross-sectional study involved 218 patients with T2DM who were admitted to Hospital Tengku Ampuan Afzan, Kuantan, Malaysia, for diabetic foot problems from June 2011 to July 2012. A form was developed to document the patients' profiles, comorbidities, complications, investigations, treatment and clinical outcomes. The predictors for major lower limb amputations were determined using univariate and stepwise logistic regression analysis. RESULTS: A total of 31 patients underwent major lower limb amputations (25 transtibial, 6 transfemoral). The following factors were found to be associated with the incidence of major lower limb amputations: T2DM duration ≥ 10 years, diabetic neuropathy, diabetic nephropathy, presentation with gangrene, diabetic foot conditions of Wagner grade 4 or 5, and necrotising fasciitis. Patients who underwent major amputations had significantly lower haemoglobin and albumin levels, and higher total white blood cell counts, erythrocyte sedimentation rates, and C-reactive protein, urea and creatinine levels. However, only T2DM duration ≥ 10 years, positive bacterial culture and albumin levels were significant on stepwise logistic regression analysis. CONCLUSION: T2DM duration ≥ 10 years, positive bacterial culture and low albumin levels were found to be significant predictive factors for major lower limb amputation among patients with T2DM admitted for diabetic foot problems.

The potential of 3-dimensional construct engineered from poly(lactic-co-glycolic acid)/fibrin hybrid scaffold seeded with bone marrow mesenchymal stem cells for in vitro cartilage tissue engineering.

Articular cartilage is well known for its simple uniqueness of avascular and aneural structure that has limited capacity to heal itself when injured. The use of three dimensional construct in tissue engineering holds great potential in regenerating cartilage defects. This study evaluated the in vitro cartilaginous tissue formation using rabbit's bone marrow mesenchymal stem cells (BMSCs)-seeded onto poly(lactic-co-glycolic acid) PLGA/fibrin and PLGA scaffolds. The in vitro cartilaginous engineered constructs were evaluated by gross inspection, histology, cell proliferation, gene expression and sulphated glycosaminoglycan (sGAG) production at week 1, 2 and 3. After 3 weeks of culture, the PLGA/fibrin construct demonstrated gross features similar to the native tissue with smooth, firm and glistening appearance, superior histoarchitectural and better cartilaginous extracellular matrix compound in concert with the positive glycosaminoglycan accumulation on Alcian blue. Significantly higher cell proliferation in PLGA/fibrin construct was noted at day-7, day-14 and day-21 (p<0.05 respectively). Both constructs expressed the accumulation of collagen type II, collagen type IX, aggrecan and sox9, showed down-regulation of collagen type I as well as produced relative sGAG content with PLGA/fibrin construct exhibited better gene expression in all profiles and showed significantly higher relative sGAG content at each time point (p<0.05). This study suggested that with optimum in vitro manipulation, PLGA/fibrin when seeded with pluripotent non-committed BMSCs has the capability to differentiate into chondrogenic lineage and may serve as a prospective construct to be developed as functional tissue engineered cartilage.

Morphological study of the newly designed cementless femoral stem.

A morphology study was essential to the development of the cementless femoral stem because accurate dimensions for both the periosteal and endosteal canal ensure primary fixation stability for the stem, bone interface, and prevent stress shielding at the calcar region. This paper focused on a three-dimensional femoral model for Asian patients that applied preoperative planning and femoral stem design. We measured various femoral parameters such as the femoral head offset, collodiaphyseal angle, bowing angle, anteversion, and medullary canal diameters from the osteotomy level to 150 mm below the osteotomy level to determine the position of the isthmus. Other indices and ratios for the endosteal canal, metaphyseal, and flares were computed and examined. The results showed that Asian femurs are smaller than Western femurs, except in the metaphyseal region. The canal flare index (CFI) was poorly correlated (r < 0.50) to the metaphyseal canal flare index (MCFI), but correlated well (r = 0.66) with the corticomedullary index (CMI). The diversity of the femoral size, particularly in the metaphyseal region, allows for proper femoral stem design for Asian patients, improves osseointegration, and prolongs the life of the implant.

Primary stability recognition of the newly designed cementless femoral stem using digital signal processing.

Stress shielding and micromotion are two major issues which determine the success of newly designed cementless femoral stems. The correlation of experimental validation with finite element analysis (FEA) is commonly used to evaluate the stress distribution and fixation stability of the stem within the femoral canal. This paper focused on the applications of feature extraction and pattern recognition using support vector machine (SVM) to determine the primary stability of the implant. We measured strain with triaxial rosette at the metaphyseal region and micromotion with linear variable direct transducer proximally and distally using composite femora. The root mean squares technique is used to feed the classifier which provides maximum likelihood estimation of amplitude, and radial basis function is used as the kernel parameter which mapped the datasets into separable hyperplanes. The results showed 100% pattern recognition accuracy using SVM for both strain and micromotion. This indicates that DSP could be applied in determining the femoral stem primary stability with high pattern recognition accuracy in biomechanical testing.

Design process of cementless femoral stem using a nonlinear three dimensional finite element analysis.

BACKGROUND: Minimal available information concerning hip morphology is the motivation for several researchers to study the difference between Asian and Western populations. Current use of a universal hip stem of variable size is not the best option for all femur types. This present study proposed a new design process of the cementless femoral stem using a three dimensional model which provided more information and accurate analysis compared to conventional methods. METHODS: This complete design cycle began with morphological analysis, followed by femoral stem design, fit and fill analysis, and nonlinear finite element analysis (FEA). Various femur parameters for periosteal and endosteal canal diameters are measured from the osteotomy level to 150 mm below to determine the isthmus position. RESULTS: The results showed better total fit (53.7%) and fill (76.7%) canal, with more load distributed proximally to prevent stress shielding at calcar region. The stem demonstrated lower displacement and micromotion (less than 40 µm) promoting osseointegration between the stem-bone and providing primary fixation stability. CONCLUSION: This new design process could be used as a preclinical assessment tool and will shorten the design cycle by identifying the major steps which must be taken while designing the femoral stem.

Fabrication of low-cost, cementless femoral stem 316L stainless steel using investment casting technique.

Total hip arthroplasty is a flourishing orthopedic surgery, generating billions of dollars of revenue. The cost associated with the fabrication of implants has been increasing year by year, and this phenomenon has burdened the patient with extra charges. Consequently, this study will focus on designing an accurate implant via implementing the reverse engineering of three-dimensional morphological study based on a particular population. By using finite element analysis, this study will assist to predict the outcome and could become a useful tool for preclinical testing of newly designed implants. A prototype is then fabricated using 316L stainless steel by applying investment casting techniques that reduce manufacturing cost without jeopardizing implant quality. The finite element analysis showed that the maximum von Mises stress was 66.88 MPa proximally with a safety factor of 2.39 against endosteal fracture, and micromotion was 4.73 µm, which promotes osseointegration. This method offers a fabrication process of cementless femoral stems with lower cost, subsequently helping patients, particularly those from nondeveloped countries.

Anthropometric measurements of the human distal femur: a study of the adult Malay population.

The distal femurs of 100 subjects (50 men, 50 women) from the Malay population aged between 19 and 38 years were scanned to measure the anterior-posterior (AP) and medial-lateral (ML) width. The mean AP values were 64.02 ± 3.38 mm and 57.33 ± 3.26 mm for men and women, respectively, and the mean ML values were 74.91 ± 3.52 mm and 64.53 ± 3.07 mm. We compared our data to that published previously for the Chinese and Indian populations. It was found that the Malay population had smaller distal femur than that of the Chinese but was larger than that of the Indian population (P < 0.05). In conclusion, although it is well established that Asians have a smaller distal femur size than that of the Western population, the variations in different Asian ethnicities may need to be considered when designing the appropriate knee implant.

Factors associated with the outcome of open tibial fractures.

BACKGROUND: Although open tibial fractures are common in Malaysia, the outcomes for these patients have not been evaluated in the literature. This retrospective study was conducted to examine the factors associated with infection and non-union in open tibial fractures managed at Hospital Tengku Ampuan Afzan (HTAA), Kuantan, in 2009. METHODS: From 1 January until 31 December 2009, the Department of Orthopaedics of HTAA managed 58 patients with open tibial fracture who had a minimum of a one year follow-up period. The median age was 24.5 years (range: 4 to 72 years). The open tibial fractures were graded using the Gustilo open fracture classification as follows: 4 grade I, 21 grade II, 24 grade IIIA and 9 grade IIIB. All open fractures were subjected to a standard treatment protocol at HTAA, which includes the use of prophylactic antibiotics, emergency debridement, fracture stabilisation, wound coverage, and bone reconstruction when required. The mean time from injury to the initial debridement was 29.7 hours (range: 13 to 216 hours). RESULTS: Seventeen (29%) cases were complicated by infection, and 10 patients (17%) developed non-union. The grade of the open fracture was significantly associated with infection, and age and the time interval between the injury and the initial wound debridement were significantly associated with non-union. CONCLUSION: The high rates of infection and non-union, particularly in severe open fractures, indicate that there is a need to improve the management of open tibial fractures treated at HTAA. The time to initial debridement is an important factor that can be readily amended to improve the outcome. Further studies with larger sample sizes are likely needed to replicate and confirm our findings.

Morphology study of the proximal femur in Malay population / Estudio de la morfología del fémur proximal en la población malaya

Clinical practice in our country showed a lack of suitable implants that perfectly match the anthropometry of the local population. However, there have been no reports or comprehensive studies conducted to substantiate this argument. We therefore prospectively studied 120 hips from sixty subjects with an average age of 25+/-5.18 years old. The average weight and height were 61.48+/-13.84 kg and 1.65+/-9.63 m respectively. The exclusion criteria were pregnant woman, those who had injury to the hip joint, and those with implant or prosthesis. Four parameters were measured ­ the femoral head diameter (FHD), femoral neck length (FNL), femoral neck width (FNW) and collo-diaphyseal angle (CDA). Statistical analysis showed no significant differences between left and right femora but significant differences were found between male and female subjects. The results for the male and female femurs are as follows ­ FHD: 43.6+/-3.1 mm and 38.9+/-2.2 mm; FNL: 91.1+/-5.7 mm and 81.8+/-4.3 mm; FNW: 28.9+/-3.4 mm and 26.0+/-4.3 mm; CDA: 132.3°+/-3.4° and 129.9°+/-4.0°. This data could be used as a guideline to design a more suitable implant for the Malay population which covers most of the South East Asian countries.

Problemas con respecto al tamaño de los implantes en relación a cada población se han convertido en una cuestión esencial para la sociedad ortopédica. Varios factores han sido identificados en la literatura, los que pueden afectar la estabilidad del implante, especialmente en el fémur proximal. Se estudió prospectivamente 120 caderas mediante imágenes de tomografía computarizada. Sesenta sujetos fueron reclutados, edad media 25+/-5,18 años, peso de 61,48+/-13,84 kg y altura de 1,65+/-9,63m. Los criterios de exclusión para este estudio incluyeron a mujeres embarazadas, quienes hubiesen experimentado lesiones cadera, uso de implantes o prótesis. Nuestros datos se compararon usando las pruebas de Anderson-Darling y t-test. Los parámetros medidos fueron diámetro de la cabeza femoral (FHD), longitud del cuello femoral (FNL), ancho del cuello femoral (FNW) y el ángulo cuello-diafisial (CDA). Los resultados de los fémures masculinos y femeninos fueron los siguientes: FHD 43,6 +/- 3,1 mm y 38,9 +/- 2,2 mm, FNL 91,1 +/- 5,7 mm y 81,8 +/- 4,3 mm, FNW 28,9 +/- 3,4 mm y 26,0 +/- 4,3 mm; CDA 132.3 +/- 3.4 y 129.9 +/- 4,. Este estudio prospectivo y transversal centrado en la población malaya, proporcionó información esencial sobre el valor normal de la porción proximal del fémur, datos que mejorarán el conocimiento de los aspectos anatómicos y, finalmente, ayuden al diseño del vástago femoral en la artroplastía total de cadera (ATC). Los resultados proporcionarán una nueva comprensión por parte del cirujano ortopédico.